Based on 0 reviews
Be the first to review “HVS0401U Micro 4 Channel HDMI/ DP Video Switcher”
You must be logged in to post a review.
Key Features:
₹30,000 +GST
CompareYou must be logged in to post a review.
Record or stream an HDMI signal via USB 3.0 with the Lilliput UC1218 HDMI to USB 3.0 Video Capture. With its HDMI v1.4a input, this capture device will accept resolutions up to 1920 x 1080p60. It automatically detects the incoming video format and transmits it via USB 3.0 at up to 350 MB/s. It supports UVC video capture as well as YUV video output.
As this is a USB bus-powered device, you can connect multiple units to the same computer (additional USB hardware may be required). The UC1218 is compatible with a variety of available third-party software apps for Windows, Linux, and macOS.
Combining capabilities usually reserved for a computer controlled converter the SC2030 3G-SDI/HDMI Scaling Cross Converter from AV Matrix is a compact device that features a video cross converter and scaler all in one. The SC2030 features both an HDMI and a 3G-SDI input, and can cross convert either signal to the other. It also features a 3.5mm analog audio input which can be embedded into your output signal. The built-in scaler and frame rate converter each allow you to convert the input signal to your required output standard.
The SC2030 features one HDMI output and two 3G-SDI outputs, controllable via selectable conversion modes accessed by DIP switches, providing you with a variety of modes to fit your needs. It can also be controlled using a Windows computer with AV Matrix software via the micro-USB port, which is also used to power the unit. Dual threaded locking connectors allow you to power the unit with external power supplies for redundancy.
Support 433Mhz wireless or wired tally connection
Up to 200m wireless connection distance (line-of-sight)
The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232
GPIO compatible with AVMATRIX and other video switchers
Compatible with VMix via USB type-c
Wireless PTZ camera control via RS-232/RS-485 pass through
Up to 16 tally lamps can be supported
Both front and rear indicators on the lamps with 4-level adjustable brightness
Visible signal strength and battery status on the tally lamp
Tally lamp can be powered by USB type-c or 18650 li-ion battery
1/4 inch hot shoe for tally lamp installation
2×HDMI & 2×3G-SDI inputs, support auto-detected
2×HDMI PGM outputs,1×HDMI multiview output, 1×USB type-C output
All outputs are configurable and assignable
USB for capturing and streaming on PC or Android phone
Clearly visible multiview & status page
Upstream key: Luma key, Chroma key, 2×PIP/ POP
Downstream key and LOGO overlay
T-bar/ Auto/ Cut transitions; various effects: WIPE(11×2 patterns)/ MIX/ DIP
Audio mixer: 2×SDI, 2×HDMI embedded audio and 2×MIC/ line In; audio delay available
Media library: 39 default patterns, 16 imported images, 16 captured images, 2 color generators
LAN port for PC software remote control
FTB/ MUTE/ STILL/ GPIO for tally
Select at least 2 products
to compare





There are no reviews yet.